The Newton Dialer will contact up to 8 persons by text or speech (or both simultaneously) via the standard BT Telephone line to warn of an alarm condition. The PA5 pre-programmed dialer requires a power source, which can be either the PA6 (a battery connection for the dialer when used with a CP2) or the PA7 (a 12V power pack for when the dialer is used with the PA50 or CP9).
• Very easy installation with simple connection to power supply and BT phone socket
• 32 Character display
• 4 voice messages – each of up to 32 seconds in length
• 8 Contact numbers
• 4 text messages
• Call acknowledgement
• Call abort
• Passcode protected
• 2 programmable outputs
• Remote access via touch-tone telephone
Provides additional alarm functions for the Newton PA50 Alarm, including text messaging and voice messages of up to 8 preset contacts.
A 12V power supply is required and this should be ordered with the dialer at purchase depending on whether the PA50 Alarm is used with a system that contains a Newton Power Converter:
If no Newton Power Converter is included within the pumping system, the Mains Connector For Dialer is required – Newton Code PA7.
If the pumping system includes a Newton Power Converter, the Battery Connection For Dialer is required – Newton Code PA6.