The Newton Trojan is a specialist pumping system suitable for a variety of pumping tasks, ranging from the lifting of sewage from basements to a higher level sewage system, to the removal of groundwater and surface drainage. The sump is available in depths of 1m and 1.5m.
Choice of clean water pumps of 400 & 750 watts or a Sewage Cutter Pump of 750 watts.
All internal pipe work supplied terminating in 63mm uPVC socket or 50mm uPVC socket ready for
System supplied with cast iron Y-type neoprene ball sewage non-return valve for sewage systems
and cone or flap valves for clean water. Two quick release couplings per pump for easy installation and removal for servicing
1 x 110mm invert flange with hole cutter included
Additional 110mm or 63mm inlets available as cost option
Large foot to base of chamber to prevent flotation
Locked & sealed lid and frame supplied
Lifting chain(s) supplied
2 x 32mm power conduits supplied
1 x 32mm vent pipe and pipe saddle ready for connection to stack pipe
The Trojan Packaged Sump System is ideally suited as a sewage lifting station for when the sewage invert is below the height of the main sewage system. When used for sewage the Newton Trojan should only be used where the other toilet facilities are pumped to gravity.
When storage of sewage is required to accommodate the requirement of Drainage and Waste Disposal Building Regulations 2000 Part H of 150 litres per person per day, full size sewage systems are available – please speak to our Technical Department.
The Trojan is also clean water and effluent capable when supplied with the correctly specified pump and so is suitable for large volume removal of ground and surface water delivered by gullies and surface drains. Confirmation of the water type capability of each pump is confirmed in the table above.
Order the correct pump for the water type, head and duty
Not suitable as a whole house sewage system where 24 hour storage capability is required