Damp Proofing

Typical Applications

• CDM MultiPlug (A1) – For securing Newton Cavity Drain Waterproofing membranes to the wall and for providing a fixing point for 5mm screws and the CDM Helical MultiPlug Tie.
• Newtonite Mesh Plugs (A16) – For fixing NewLath 805 Mesh Membrane to walls.
• Newtonite Cob Plugs (A17) – For fixing damp proofing membranes to less stable substrates.
• Newtonite 801 Mastic (A18) – For application around the holes drilled for the fixing plugs and preventing damp from reaching internal wall finishes.
• Newtonite Mesh Plugs (A20) – A blue variant of the Newtonite Mesh Plugs, supplied in smaller packs to match the roll size of Newtonite 803 Mesh Membrane.
• Mesh Tape (A25) – A meshed variant of CDM Overtape for Newton meshed membranes.
• Pipe Collar (A35) – Self-adhesive, preformed pipe seal for sealing a flat membrane to a protruding pipe.
• Back-Box Liner single (BX1) – Preformed waterproof lining for electrical pattress boxes.
• Back-Box Liner double (BX2) – Preformed waterproof lining for electrical pattress boxes.
• Newtonite Pipe Sleeve (BX3) – Preformed waterproof sleeve for 110mm pipe.
• Newtonite Joist Liner (BX4) – Waterproof lining for steels and joist ends – size made to order.
• Newton CDM Helical MultiPlug Tie (WT 155 to 300) – For fixing into the head of the CDM MultiPlug for the tying in of block or brick internal walls that are built in front of the Newton Cavity Drain Waterproofing membranes.