Waterproofing Products

Home » Products » Page 20

Liquid Waterproofing Membranes

System 100

Mortars and Plasters

System 200

Gas Protection

Concrete Joint and Leak Sealing

System 300

Injection Hose Systems

Injection Hose Systems

External Waterproofing and Drainage Membranes

System 400

Cavity Drain Waterproofing

System 500

Sheet Flooring Membranes

System 600

Coatings

System 700

Damp Proofing Products

System 800

Primers, Preparation & Reinforcement

System 900

Pumping Systems & Ancillaries

Pumps and Controls

Coatings

A range of liquid applied protective and decorative internal flooring products. These coatings are fast curing, available in a variety of colours, and are typically used for the refurbishment and protection of commercial and domestic floors.

Waterproof Coatings for Internal Floors

Liquid waterproof coatings provide a fast-curing, straightforward and effective method for internal flooring protection.

At Newton, our coatings are compatible with both residential and commercial applications, and offer customers a cost-effective method for creating a durable floor coating or internal lining.

Epoxy Top Coat – High Build Epoxy Floor Coating

Newton Epoxy Top Coat is a solvent-free floor coating that has excellent adhesion and can provide protective and decorative properties to concrete, steel and other substrates.

The cured coating creates a tough and durable layer with excellent chemical resistance, suitable for a wide range of different applications including manufacturing units, food preparation areas, and industrial buildings.

Have a read of this project where Newton floor coatings were installed:

• Waterproofing the Warwick Court Redevelopment

Polyurea Waterproof Coating

Our polyurea waterproof coating is a solvent-free, hot spray coating that cures into a flexible and impermeable membrane with outstanding chemical resistance properties.

The coating is ideal for repairing and protecting soil pipes, drainage canals, drainpipes, tank farms, industrial floorings, roof coverings, parking lots, conveyers, pavements, retention pounds, and bridges, amongst other applications.

Click on the boxes below to find out more about Newton’s waterproof coatings.

HDPE and HDPP Sheet Flooring Membranes

A range of HDPE and HDPP sheet flooring membranes which provide a damp proof solution for commercial and domestic floors. The membranes protect the floor finish by ‘decoupling’ it from the substrate, preventing damage as a result of movement and/or cracking.

Both Newton’s HDPE and HDPP waterproofing membranes provide excellent protection against water and water vapour; isolating internal flooring from dampness below, as well as contaminants such as alkalies, hydrocarbons, saline solutions and organic acids.

Both materials offer effective waterproofing protection and can be used in conjunction with other Newton products. whilst also protecting against substrate movement

Loose-Laid Flooring Membranes

Newton DampSafe 601 Slimline and DampSafe 603 are loose-laid sheet flooring membranes of 1mm and 3mm thickness respectively. Both can protect flooring from damp slabs and contamination, and can also be used as part of the Newton CDM System below ground or with Newtonite damp proofing membranes above ground.

Decoupling Mat for Tiling Floors

Newton DampSafe 603 Tile D-Mat is a 3mm decoupling mat that isolates the tiled floor surface from cracking or movement in the substrate, and prevents compressive stress from acting on specific points on the tiled floor.

The lightweight membrane is tough and durable, and the fleece surface on both sides absorbs tile adhesive to create an exceptional bond with both the subtrate below and the tiled floor above.

FAQ

What is the advantage of sheet membrane system?

The use of sheet membrane offers the benefit of clear visibility, making it convenient to locate the membrane. Unlike liquid membrane, which can lead to unintended gaps in the seal during application, sheet membrane can be precisely cut to fit.

The Newton Cavity Drain Membrane (CDM) System is a maintainable basement waterproofing solution, certified to BES 6001 by BRE Global, ideal for new-build basements and refurbishment projects.

The four components of the Newton CDM system

Comprising of four components: Cavity Drain Membranes, Drainage, Pumps and Control Systems, the Newton CDM System complies with the British Standard for Waterproofing and provides a Grade 3 habitable internal environment.

Cavity Drain Membranes and Drainage

Cavity drain membrane (CDM) systems are a maintainable, internal basement waterproofing solution, suitable for protecting below-ground environments against water that has penetrated through the structure. CDM Systems are known as ‘Type C’ waterproofing in British Standard 8102:2022 and are ideal for new-build, refurbishment and historic/listed projects.

Known as the most failsafe form of waterproofing, the cavity drain membranes capture ingressing water at the point of ingress, then the CDM drainage system manages and directs the water to an integral pumping system or drainage outlet for safe removal.

The Newton PAC-500 System also provides a combined CDM waterproofing and gas proofing system for below ground spaces that are at risk from ground gases.

Pumps and Control Systems

Once the water has been captured by the cavity drain membranes and drainage channels, it needs to be safely removed. The Titan-Pro is a packaged sump chamber and pump system designed specifically to be used with the Newton CDM System. Compatible with a variety of Newton pumps, it is ideal for almost any cavity drain waterproofing system.

Have a read of these projects where the Newton CDM System was successfully used:

• Waterproofing the London School of Economics
• Transforming the Royal College of Music, London
• Luxury Basement Extension, South London

Cavity Drain System Ancillary Products

The Newton CDM System requires a number of specialist ancillary products that are critical for correct installation. At Newton, we supply the full range of ancillary items that are used in conjunction with our cavity drain membranes, drainage and pumping systems.

FAQ

What are the advantages of drained cavity system?

The drained cavity system offers certified and failsafe basement waterproofing. It efficiently captures and removes water, ensuring a dry and protected environment. Its versatility makes it suitable for various projects, including new-builds, refurbishments, and historic buildings. The system also provides gas proofing capabilities for below-ground spaces. With compatible ancillary products and efficient water removal using pumps, the CDM System is a reliable and maintainable solution.

Cavity Drain Waterproofing Solutions Across the UK

We provide cavity drain waterproofing products and solutions across the whole of the UK:

• London
• Leeds
• Manchester
• Birmingham
• Bristol
• Liverpool
• Scotland
• Wales
• Northern Ireland
• Midlands
• South West
• South East
• North West
• North East

Preformed External Waterproofing Membranes

A selection of preformed external waterproofing and drainage membranes, and Newton’s flagship self-healing Type A membrane HydroBond 403 Plus. Used externally, these products provide waterproofing solutions for earth-retained structures and covered decks.

What Are External Waterproofing Membranes?

External waterproofing membranes are a range of liquid-applied and sheet membranes that can either be post- or pre-applied to the exterior surface of a below-ground or earth-retaining structure.

The membranes are categorised as a ‘Type A’ form of waterproofing as per British Standard 8102:2022, which are designed to resist hydrostatic pressure and prevent water passing through the structure and penetrating the internal environment.

Newton supplies a wide range of external waterproofing membrane products, including our flagship HydroBond 403 Plus self-healing sheet membrane.

Newton HydroBond 403 Plus – Benefits and Applications

Newton HydroBond 403 Plus is a high-performance self-healing membrane that creates mechanical bond with the structural concrete and provides a waterproof envelope around the structure. The gas barrier variant also protects against radon gas, carbon dioxide and various hydrocarbons.

HydroBond 403 Plus is often combined with other Newton products to provide a comprehensive structural waterproofing solution. As a continuous external Type A membrane it is pre-applied to raft and wall formwork prior to the placement of the reinforced concrete.

Have a read of these projects where Newton HydroBond 403 Plus was used:

• Cambridge House Luxury Hotel Waterproofing
• 21 Basements in 1 Project, Clapham Old Town

Newton Drainage Membranes

Drainage membranes protect the external waterproofing membrane and the structure from water pressure, chemicals in the ground and from damage during backfilling.

Drainage membranes such as HydroBond 410 GeoDrain consist of a geotextile filter layer that is thermally welded to a HDPE drainage membrane. This drainage layer prevents water pressure from coming to bear against a structure, provides protection against damaging chemicals in ground water and filters out any suspended soil particles that might block the membrane.

Click on the boxes below to find out more about Newton’s external waterproofing and drainage membranes

Concrete Joint and Leak Sealing

A range of products used to waterproof construction joints and movement joints of retained concrete structures so that they become integrally waterproof.

The Importance of Concrete Joint Sealing

Concrete joints are essential. They allow the concrete to shrink as it dries, preventing internal restraint which would lead to cracking, and they also allow it to expand and contract under different temperature conditions.

Whilst there are different types of concrete joints, if the structure is below ground then it needs to be protected against water ingress, and waterproofing products will be required to seal them. This is as well as any service or pipe penetrations and any cracks that may also appear in the concrete.

Concrete joint sealing products allow the structure to expand, contract and move without affecting its waterproofing integrity and even prevent contaminants in the soil from entering the structure.

Newton’s Concrete Joint and Leak Sealing Products

Our innovative range of products can be used to waterproof joints in concrete and provide a Type B waterproofing structure that acts as the primary form of resistance to water ingress. This includes all below-ground structures, including tunnels, basements, water tanks, and podium decks.

Concrete injection resins are also an effective method of leak sealing in a wide range of scenarios. From creating Type B waterproof structures using injection hoses to repairing leaks and cracks in existing concrete structures.

Have a read of these projects where concrete joint and leak sealing were successfully addressed.

• Waterproofing the Limehouse Link Tunnel, London
• Injection Hose Waterproofing, Jersey
• Resin Injection Leak Sealing, London

Newton 302 Injection Hose

Newton 302 Injection Hose is a high-performance waterbar system for sealing construction joints in earth retaining and water retaining concrete structures. The waterbar is installed within the joint and, once the concrete is cured, an injection resin is pumped into the hose under pressure. The resin penetrates the surrounding concrete within the construction joint, and cures to create a permanent seal for any cracks, capillaries, pores, and honeycombing within the structure.

Depending on the injection requirement, Newton can supply the whole range of high quality acrylic and polyurethane resins from our specialist resin supplier Tradecc.

Click on the boxes below to find out more about Newton’s concrete joint and leak sealing products

Mortars and Plasters

A range of cement-based mortars suitable for where a high depth of repair or levelling to concrete is required, as well as compatible plasters for use with Newton’s range of meshed waterproofing and damp proofing membranes.

Rapid Set and High Strength mortars and plaster

Mortars and plasters are essential ancillaries in the installation of effective waterproofing. For example, our cement-based structural mortar HydroSeal 203-RM has been instrumental in a wide range of waterproofing projects. Mostly used for durable repairs to concrete structures, it can also be used to repair bridges, floors, footpaths, roads, runways, and decks.

Mortars such as this are also regularly used for concrete levelling where a completely flat and uniform surface is required quickly. With the addition of water, they create a rapid-curing mortar which will set quickly and be safe for foot traffic within hours.

Benefits of using Newton mortars

HydroSeal 203-RM is a single component, fast setting mortar. It is polymer modified and fibre reinforced with a high adhesion and compressive strength. The mortar can be installed up to 100mm deep, or it can be mixed with sharp sand to create a screed with a maximum depth of 300mm.

Overall, HydroSeal 203-RM provides the following benefits:

• Strong and durable even at sub-zero temperatures
• High bond strength greater than concrete
• Sets in ten minutes for quick application
• Resistant to 10 bar water pressure
• Non-toxic when cured and suitable for use in reservoirs or other drinking water containment areas
• Resistant to acid gases, chloride ions, and sulphates

Have a browse of some of our projects where HydroSeal 203-RM was used to create a durable waterproof area.

• Balcony Waterproofing & Fireproofing, London
• 21 Basements in 1 Project, Clapham Old Town

Tarmac Whitewall Plaster and mixing equipment

At Newton we also recommend Limelite Whitewall Plaster from our partners at Tarmac. Used in conjunction with our range of meshed damp proofing membranes, it provides a smooth white finish which is extremely hard and durable. A two-coat application is required when used with the meshed membranes, but a single coat is sufficient when applied to most other substrates.

To aid with on-site mixing and product preparation, we also supply a range of professional mixing equipment from Collomix. This includes a range of hand-held mixers, stirrers and mixing buckets, as well as a cleaning bucket, mixing stand and transport cart. This equipment helps to maximise mixing efficiency and ensures that all mortars and plasters are properly prepared prior to application.

FAQ

What type of mortar is waterproof?

Waterproofing Mortar is a cement coating that has been polymer modified to provide exceptional performance for both interior and exterior applications. It is specifically designed to effectively waterproof various structures such as basements, foundations, retaining walls, tilt-up concrete, cast-in-place concrete, and precast concrete. This product complies with ASTM C1583 standards.

Does water pass through mortar?

Water can infiltrate a wall system by means of pores and cracks in the masonry units and the mortar joints. However, it is quite common for water to permeate through cracks or gaps occurring between the masonry and mortar.